sidestand

[pj748r]

does anyone know of a sidestand/wiring mod i can do to my 2000 748r so i can start it while its on the sidestand?thanks

[Aotearoa]

http://www.evoluzione.net
Then go to the specials option ...$31.99 $us + shipping :P

[Felix]

MotoDesigns in York. 01904 623 421. Speak to Tim, usually in stock.

[nelly]

I'm making my own now to. £25 fitted or posted free ;)

[Aotearoa]

check the market place :P

[Ray]

If you don't mind the potential to set off with the sidestand down. Remove the switch completely, unplug the connector and link the two wires together in the half of the plug that remains in the bike.

Linking the two remaining wires is vital and you need to make sure they stay linked cos the engine won't run at all if they are not joined.

The solutions mentioend by other above make so the engine will run but cuts as soon as a gear is selected/the neutral
light goes out.

Ray

[BOLT]

test

[BOLT]

I did this myself to my 998, and it cost 50p for the diode.

Procedure is to connect a IN4001 diode from the +ve side of the neutral light to the 'Blue' wire side of the sidestand, with the 'striped' end of the diode connected to the neutral light side.

This has worked well for over 12 months and for 50p, a real bargain.

This way means that the engine operates either when the side stand is up, or when both the sidestand is down and the neutral light is on.
hope this helps

[DJ Tera]

I "modified" the switch myself for free when I chucked it down the road after hitting some diesel a few months back:P

[BOLT]

Is that just an excuse to get a red paintjob ?

[pj748r]

:lol: thanks for the help,will get it sorted at the weekend,when i'm fitting me race cans!!!

[DJ Tera]

Is that just an excuse to get a red paintjob ?



Well the left hand fairing got one, it was red underneath:cool:

[Edited on 15-5-2003 by DJTera]

[lapman]

thats why yellow panels are more expensive. They have to paint them twice....

Lapman