848spence
31-Aug-2012, 20:56
Ducati monster based 583 race bike.
Last winter I bought this bike stripped it down to every last nut and bolt. Had Frame, swingarm and lots of other bits powder coated. I built her back up to what is for sale now.
Spec:
Rs250w race seat unit
Twin front discs with brembo master cylinder and calipers, with HEL lines.
mpl race clucth slave cylinder
Quick action throttle.
Ducati Performance Ignitors.
Trailtech stealth race dash.
Lightweight battery
K&N Air filter and open air box.
clip ons.
race fuel cap.
oil cooler.
Ohlins fully adjustable rear suspension
Custom MHP 2 into 1 exhaust pipe with Termignoni end can.
Carbon Shark fin.
Custom race rearsets.
Quick release fuel line.
Fitted with 848 nose cone and light weight fairing mount.
Race belly pan.
SPARES LIST
1 x 848 fairing mount(needs abit of bending)
1 x belly fiberglass belly pan
1 x spare front disc
1x spare battery
1 x front brembo brake master cylinder
1 x rear brembo brake master cylinder
1 x brembo clutch master cylinder
1 x braided clutch line
1 x 748/996 style rear master cylinder mount
1 x custom mount for standard rev counter
1 x 14t sprocket
1 x 15t sprocket
1 x 16t sprocket
2 x 46t sprocket
1 x 45t sprocket
1 x 43t sprocket
1 x 40t sprocket
1 x sprocket carrier
2 x clutch levers
1 x brembo resevoir holder
various bar grips
varoius crash bobbins
1 x exhaust baffle for the termi exhaust fitted
4 x clip on bars
1 x front wheel spindle and nut
1 x 20l jerry can
1 x part worn carbon lorraine front pads
1 x throttle cable
1 x front rear wheel bearings
1 x head stock bearing
1 x clutch basket bearing
1 x clutch basket and plates
1 x pair of custome rear set plates and pegs
1 x rear set
varoius gear linkages
4 x bar end foot peg bungs
1 x 1/2 can red spray paint( for touch up)
1 x new chain adjuster plate
1 x used chain adjuster plate
1 x rear tank mount
1 x spare battery
various stickers and spare race numbers
over £1100 worth of receipts for parts for this bike since beginning of the season, not including the new clutch basket and plates, powder coating new tank and the list goes on...
I have dyno print out of bike making 52hp at begining of season
WM Snells prepared engine beginning of season and she made 52bhp on dyno, was tested at brands hatch and made 52bhp then at last round dyno’d again and still making 52bhp.
Engine has been serviced after every round with new oil and filter.
Its a race winning bike in the right hands.
Absolutley love this bike and the series, shame to be leaving, but haven’t a choice in the matter.
Has a V5, currently sorn’d
Bike can be viewed or collected from Southampton.
£1800
couple of pics
http://i147.photobucket.com/albums/r304/spencerfleet/SDIM2187.jpg
http://i147.photobucket.com/albums/r304/spencerfleet/IMG_5127-1.jpg
http://i147.photobucket.com/albums/r304/spencerfleet/IMG_5020.jpg
Last winter I bought this bike stripped it down to every last nut and bolt. Had Frame, swingarm and lots of other bits powder coated. I built her back up to what is for sale now.
Spec:
Rs250w race seat unit
Twin front discs with brembo master cylinder and calipers, with HEL lines.
mpl race clucth slave cylinder
Quick action throttle.
Ducati Performance Ignitors.
Trailtech stealth race dash.
Lightweight battery
K&N Air filter and open air box.
clip ons.
race fuel cap.
oil cooler.
Ohlins fully adjustable rear suspension
Custom MHP 2 into 1 exhaust pipe with Termignoni end can.
Carbon Shark fin.
Custom race rearsets.
Quick release fuel line.
Fitted with 848 nose cone and light weight fairing mount.
Race belly pan.
SPARES LIST
1 x 848 fairing mount(needs abit of bending)
1 x belly fiberglass belly pan
1 x spare front disc
1x spare battery
1 x front brembo brake master cylinder
1 x rear brembo brake master cylinder
1 x brembo clutch master cylinder
1 x braided clutch line
1 x 748/996 style rear master cylinder mount
1 x custom mount for standard rev counter
1 x 14t sprocket
1 x 15t sprocket
1 x 16t sprocket
2 x 46t sprocket
1 x 45t sprocket
1 x 43t sprocket
1 x 40t sprocket
1 x sprocket carrier
2 x clutch levers
1 x brembo resevoir holder
various bar grips
varoius crash bobbins
1 x exhaust baffle for the termi exhaust fitted
4 x clip on bars
1 x front wheel spindle and nut
1 x 20l jerry can
1 x part worn carbon lorraine front pads
1 x throttle cable
1 x front rear wheel bearings
1 x head stock bearing
1 x clutch basket bearing
1 x clutch basket and plates
1 x pair of custome rear set plates and pegs
1 x rear set
varoius gear linkages
4 x bar end foot peg bungs
1 x 1/2 can red spray paint( for touch up)
1 x new chain adjuster plate
1 x used chain adjuster plate
1 x rear tank mount
1 x spare battery
various stickers and spare race numbers
over £1100 worth of receipts for parts for this bike since beginning of the season, not including the new clutch basket and plates, powder coating new tank and the list goes on...
I have dyno print out of bike making 52hp at begining of season
WM Snells prepared engine beginning of season and she made 52bhp on dyno, was tested at brands hatch and made 52bhp then at last round dyno’d again and still making 52bhp.
Engine has been serviced after every round with new oil and filter.
Its a race winning bike in the right hands.
Absolutley love this bike and the series, shame to be leaving, but haven’t a choice in the matter.
Has a V5, currently sorn’d
Bike can be viewed or collected from Southampton.
£1800
couple of pics
http://i147.photobucket.com/albums/r304/spencerfleet/SDIM2187.jpg
http://i147.photobucket.com/albums/r304/spencerfleet/IMG_5127-1.jpg
http://i147.photobucket.com/albums/r304/spencerfleet/IMG_5020.jpg