PDA

View Full Version : Rear Wheel Spacers


bally71
05-Sep-2012, 13:47
Can anyone tell me if the rear wheel spacers are the same on the injected supersports.

or does the spacer size depend on the rim size? (4.5 or 5.5)

dunlop0_1
05-Sep-2012, 14:31
Are you talking about the cone shaped spacer? If so they are all the same. :)

skidlids
05-Sep-2012, 21:01
I'm pretty sure the 600/750/900SS, 620/800 Supersports and 750/900SSie all use the same spacers
The 600/750SS and 750SSie and 620/800 Supersports all use the same sprocket carrier
The 900s use a very similar Sprocket carrier but has less machined off it so leaving the rear sprocket sitting futher out so as to give clearance past a 180 tyre

bally71
06-Sep-2012, 09:52
cheers guys ..

I noticed when swapping some bits around between bikes that the monster has a larger spacer than the ST2

The insert that goes into the sprocket carrier is bigger too

I've got a heap of sprocket carriers, wheels etc all turned up from various sources

Might do a bit of measuring to check