Silencer reducers

[desmojen]

Does anyone know if you can buy slip in decibel reducers for Termignoni race cans?
Any details gratefully received :)

[Jon]

Yes and No;) there is a guy at Donington tha sells them. He could not confirm though if they would fit all of the range. 45,50,etc.

[marksduc748]

raceways in fleetwood lancashire does them. cant find the number but they are in northwest yellow pages

[marksduc748]

now then its "carbon can company" you want but its owned by steve at raceways. dont know if theres a link from the race ways site

[chrisw]

I bought mine from

http://www.tecmoto.co.uk/

Look in the exhaust section.

[m1keyp]

millions of them

http://search.ebay.co.uk/ducati-db-killer_W0QQfkrZ1QQfltZ9QQsaatsZ3

[desmojen]

Thanks a bundle fellas! Do any of you actually have them fitted?

[chrisw]

Mine were fitted to a set of DP carbon cans on my ST4S. They were the 50mm ones. They are held in place by an allen bolt from underneath and you have to measure where you have to drill a hole in end of the can. Simple to do if you take your time (measure twice cut [drill] once). They significantly reduce the noise. Measure your outlet to establish the sizing you require. I have now sold the cans so I can't show you a picture of them in place.

[m1keyp]

If you have not yet got the Termi's consider the ARROW exhausts.

Full E marking with the removeable baffle "officer"

:lol::lol::pig::lol::lol:

[smilo006]

for anyone wanting more noise:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10448&item=7959877236&rd=1&ssPageName=WDVW:burn:

[desmojen]

I already have the Termi's. Honestly, they would wake the dead at twenty paces!
I want to put the back back on the road for occasional tomfoolery, but she really is too loud as is!
Tecnoto parts look ideal, I'll get the cans restuffed as well.
Thanks again ;)

[Mr_S]

These arrived today.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=88478&item=7961212825&rd=1

Out of the package

http://www.chathamclose.com/pics/baffle%20out.jpg

In the can

http://www.chathamclose.com/pics/baffle%20in.jpg

The fit in the can is very tight, almost an interference fit, and I had to clean out some of the carbon / soot to get them in.

As with the others they do need a hole drilled for the retaining bolt, but I have to say the construction quality is excellent.

A quick test at 3/4 redline brings the noise below 95dB (without I'm reading 118db!!!!) at 1m(ish). Should save me lugging standard cans to trackdays at Castle Combe and Goodwood now...

Total cost under £35 (51 euro's) delivered in a couple of days.

[JPM]

Anyone do these for triple nines?

[m1keyp]

Try http://www.fuel-silencers.co.uk/

They sell on ebay and mine arrived today bought on ebay £26.40 inc postage etc



[Edited on 15-3-2005 by m1keyp]

[Mr_S]

Originally posted by jpmercer
Anyone do these for triple nines?

Not seen any for 999/749's

Probably due to the outlet shape being different so more of a limited production compared to a standard round outlet, which is just a bit of stock pipe shaped to a funnel.

Can't see it being easy / cheap to manufacture a good fitting insert for their can. :(

[Goofy_DK]

Originally posted by Mr_S
Originally posted by jpmercer
Anyone do these for triple nines?

Not seen any for 999/749's

Probably due to the outlet shape being different so more of a limited production compared to a standard round outlet, which is just a bit of stock pipe shaped to a funnel.

Can't see it being easy / cheap to manufacture a good fitting insert for their can. :(


You can get 749-999 db-eater at www.desmoworld.de
:)

[m1keyp]

Just looked at desmoworld.de

The translation is fun "railways" but they do sell them

http://babelfish.altavista.com/babelfish/tr?doit=done&url=http://www.desmorados.com/shop/catalog/&lp=de_en

[tricky]

Did anyone see the little snippet in MCN about the guy shoved some wire wool down his cans to reduce the noise for the MOT. Apparently the wire wool shot out of the cans red hot and landed in the testers sandwich box burning his butties. :sing:

dont know if its a little porker or not but it made me laugh.

tricky.

[JPM]

Originally posted by trickz
Did anyone see the little snippet in MCN about the guy shoved some wire wool down his cans to reduce the noise for the MOT. Apparently the wire wool shot out of the cans red hot and landed in the testers sandwich box burning his butties. :sing:

dont know if its a little porker or not but it made me laugh.

tricky.

I've seen burning packing material coming out of the back of a set of termi's on a furious blast several years ago.... admittedly we were the wrong side of 150mph on a private road

[Edited on 15-3-2005 by jpmercer]

[Mr_S]

seen the wire wool trick done at Goodwood a couple of times, and seen the noise tester narrowly missed as well :)

[desmojen]

Originally posted by Mr_S
These arrived today.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=88478&item=7961212825&rd=1

Out of the package

http://www.chathamclose.com/pics/baffle%20out.jpg

In the can

http://www.chathamclose.com/pics/baffle%20in.jpg

The fit in the can is very tight, almost an interference fit, and I had to clean out some of the carbon / soot to get them in.

As with the others they do need a hole drilled for the retaining bolt, but I have to say the construction quality is excellent.

A quick test at 3/4 redline brings the noise below 95dB (without I'm reading 118db!!!!) at 1m(ish). Should save me lugging standard cans to trackdays at Castle Combe and Goodwood now...

Total cost under £35 (51 euro's) delivered in a couple of days.

Just to clarify, you do have 50mm end cans, yes?

[Mr_S]

No 45's. Can't justify the extra 5mm for naff all powergain. (only 3bhp on the dyno for my bike)

E-mail the seller for 50's

[Jon]

Originally posted by jpmercer
Anyone do these for triple nines?


No sorry JP, they only do them for proper race bikes:lol::P