PDA

View Full Version : FS - Nemesis ECU for 998


pguenet
01-Nov-2012, 23:40
Selling Nemesis ECU for 998

This is a Type 3 ECU, whilch is quite unusual as this is only dedicated to the 998
The later 999 uses the same ECU with a CAN connection whereas the 998 keeps all the standard analogue dash.

Looking for about GBP 500

Photos below:

http://i1177.photobucket.com/albums/x349/desmophil/RS%20parts/file-61.jpg
http://i1177.photobucket.com/albums/x349/desmophil/RS%20parts/file-60.jpg

skidlids
02-Nov-2012, 08:22
Seling Nemesis ECU for 998

This is a Type 3 ECU, whilch is quite unusual as this is only dedicated to the 998
The later 999 uses the same ECU with a CAN connection whereas the 998 keeps all the standard analogue dash.


Although it would run a DD bike very nicely if you fit a analouge tacho, as the AIR/MAP sensor is the same . Does away with all the coded Clocks etc and allows full access to Fuel and ignition mapping.

pguenet
02-Nov-2012, 22:12
If anybody wanted to do this, i could offer some loom as well.

pguenet
13-Nov-2012, 20:19
Any offers (not taking the mickey) before it goes on ebay?