View Full Version : Brain removal
851neil
19-Apr-2005, 22:02
Ok, so I start stripping her down and find the usual assortment of rusted in bolts, rounded off Allen heads etc and then I get to removing the sub-frame. Stripped the easy electrics out, took out the shock reservoir, and I just can't figure out how you are supposed to remove the "Brain". I've removed the 4 nuts holding it down, I've looked for a cable connector to, ahem, disconnent and I just can't see how this should be done - it's removal is not described in my manual either :puzzled:
Any advice would be appreciated.
regards
Neil
851neil
20-Apr-2005, 08:58
Bump
skidlids
20-Apr-2005, 09:25
Got a pic as I haven't had a 851 does it use a P7 or P8 type ECU
On the later 851/888 (and Laverdas) there are only 3 bolts (rubber cotton reels actually) holding the P7 in place, so I'm a tad puzzled too?
The 35way connector has a sprung tab holding it at one end and it hooks on at the cable entry end and on mine its a case of springing the clip off and angling the connector so that the hook disengages and voila!
With practice it gets easier than trying to write how to do it!
Hope that this helps
Paul
851neil
20-Apr-2005, 13:19
OK, there are 4 bolts holding the 'brain' in place and I have removed all of these. I can see that the wiring harness goes into a connector and it's this connector that I just don't seem able to remove.
At the rear end of the connector is a small philips head screw and this is next to what looks like a pivot pin.
Initially I thought that the screw was just the connector retainer and removed this expecting removal to be easy but it does not want to budge - obviously I was not keen to use a lot of force as I'm not aware of how tight a fit these things are !!
I'll try again tonight and if not successful then I'll post some photos.
cheers
Neil
Neil,
Mail or U2U me a phone number and I'll call you and talk you through it.
Rgds, Rob
851neil
20-Apr-2005, 18:58
Rob, I've sent a U2U.
thanks
Nei
Neil,
You can clearly see what a Spaghetti system looks like compared to standard headers although the ones in the pic have been modded in the cross over. Rgds, Rob
851neil
20-Apr-2005, 22:40
hmmm, tasty stuff - the pics have been added to my 851 folder for reference and possible negotiation with the boss :burn::burn:
Now then Rob, we'll have none of your pornographic pictures on here thank you very much.........:lol::lol::lol:
They look well tasty mate-the old 'nest of vipers'.:devil:
John
Neil,
I see you won the SP2 system, that be a nice addition and go well with the planned mods.
Rgds, Rob
851neil
22-Apr-2005, 10:34
yeah - cheers mate, I'm picking the pipes up tomorrow morning, then I'm across to Leeds to drop my motor off with 'Ducati John'.
It's all go at the moment - I've also managed to get confirmation of an order with Ducati for a load of stuff at what seem to be really good prices, odds and ends like clip ons, brake & clutch levers + mastercylinders, seat units, body parts, bracketry, fasteners, screen, dashboard, control cables, hoses, hydraulic hoses etc
What I can't get over is the fact that performance bits seem difficult to get hold of, but I'm new to Dukes so maybe it's just a case of learning who to speak to !!!
Where is everyone getting these cheap parts from, everytime I go anywhere for something, they haven't got it and charge full price.....can someone let me into a secret? :saint: I'm still after a seat cowl, and am loathed to bay £78 for a lil bit o plastic.....
851neil
24-Apr-2005, 11:02
no secrets neil ! seat cowl, is that the sleeve over the pillion seat ??
Yup, sleeve over pillion seat, same as the 888 on mine, but I believe the early 851's had a different type, but £78......think I'm gonna have to bite the bullet!
851Neil, Did you get my U2U mate?
Rgds, Rob
851neil
24-Apr-2005, 22:26
yip, read it and appreciate your question, when I finish my rebuild I'll let you know what I have left over. I'll probably keep the cosmetic stuff just in case I ever drop her !!
cheers
Neil
851neil
24-Apr-2005, 22:31
hello Neil !! - £78 for the cover !!! jeez that's a shocker, I've not received the parts as yet (and I need to check the part number) but I believe I've paid £30.60 + vat from Ducati.
I'll check the part numbers tomorrow and let you know.
cheers
Neil
£30.60.....Which Ducati Dealer? Take it that it wasn't the local yokels known as M&S in Newcastle......
851neil
25-Apr-2005, 14:45
just checked with the local yeeehaaaaahs and I've paid the following for rear seat parts:
seat cover 59510091A £61.06
pillion seat 59510071A £29.71
although the order has gone through, they are now saying that the seat cover is a discontinued part and that I may not be able to get hold of it !!
I've obviously got myself mixed up with the two part numbers - sorry mate.
cheers
Neil
vBulletin v3.5.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.