Log in

View Full Version : Source of nylon washers?


khu996
04-May-2005, 15:26
Anyone know of a good source for different sizes?

My "best" local fixings and fasteners place don't go as small as 3mm (I need some for the screen)...come to think of it, they don't have much at all :flame:

moto748
04-May-2005, 18:42
As I've mentioned before, I've produced some kits of stainless steel screws and nyloc nuts for the screens, hence doing away with the well-nuts.

U2U me if you're interested.

But if all you want is a handful of "screen-sized" nylon washers, I can let you have some FOC.
I had a bit of trouble sourcing them myself, but managed in the end. Most easily available nylon washers have too large an outside diameter, and show up as a plastic ring around the screw head, which is rather unsightly.

khu996
04-May-2005, 19:21
Yup, those are the ones that I've got, the ones that you can see about 20ft away from the bike !!

Your offer of the washers is very appreciated. I've sent you a u2u with my details.

Cheers mate.