Wanted: Clutch plates

[Spjallen]

I'm after a set of clutch plates for a 620 or a good place to get them from please.

[bally71]

barnett performance jobbies

about 150 per set ... well worth the money

[skidlids]

Are they worn out

Taken from the workshop manual

Normal Clutch
_______________
thickness of the drive plates (friction plates) should not be less than 3.5 mm.

Overall thickness of the set of clutch plates should not be less than 41.3 mm


APTC Clutch
______________
thickness of the drive plates (friction plates) should not be less than 3.2 mm.

Overall thickness of the set of clutch plates should not be less than 50,2 mm.