PDA

View Full Version : Starter motor not working - relay maybe?


yeti
14-Jun-2005, 10:00
After my first session at Cadwell on Saturday, the starter motor failed to work so had to resort to "bumping" her off, not easy on a 996 with a slipper!

Not had a chance to look at the problem yet other than to try to hot wire the switch - didn't make any difference.

Think it could be the starter motor relay? If I remember rightly it's down by the battery.

Anybody else had this? :sing:

Mr_S
14-Jun-2005, 13:22
Yes, was caused by a poor connection to the starter relay (round thing, bottom right of battery tray).

Cleaned the contacts, replaced the cable tie holding it tight in place, and it's been ok since.

[Edited on 14-6-2005 by Mr_S]

yeti
14-Jun-2005, 15:46
Originally posted by Mr_S
Yes, was caused by a poor connection to the starter relay (round thing, bottom right of battery tray).


Funny old thing, Nelly suggested that as well. Will investigate further now. Thanx