DP footpeg - can you get spares?

[yeti]

Having bust off my right hand Ducati Performance footpeg at Donny yesterday, andyone know if you can just buy a new peg, or have DP got the sewn up and you have to be the whole tamale again?

Anybody got a spare.............? :D

[TP]

You can buy footpegs separately from places like AJ Racing. They are the standard DP ones that rotate on the eccentric.

Can you take a quick photo of the bits?

[yeti]

Originally posted by TP
Can you take a quick photo of the bits?

Naw, they are currently "trackside".......:lol:

[TP]

Originally posted by yeti
Originally posted by TP
Can you take a quick photo of the bits?

Naw, they are currently "trackside".......:lol:

But the hanger isn't, is it?

[JPM]

What both of them?

Just measure the diameter of the peg I guess and when ordering ask the size

[m1keyp]

Down load the parts catalogue here and you will have all the part numbers

http://www.ducati.com/bikes/service/service.jhtml

[yeti]

Originally posted by m1keyp
Down load the parts catalogue here and you will have all the part numbers

http://www.ducati.com/bikes/service/service.jhtml

S'not an original Ducati peg, it's a DP and they are different

[yeti]

Originally posted by TP
Originally posted by yeti
Originally posted by TP
Can you take a quick photo of the bits?

Naw, they are currently "trackside".......:lol:

But the hanger isn't, is it?

Yeer, still got hanger, it's only the peg on the eccentric that's snapped off. I'll give AJ a call and ask them to send a few........

[antonye]

These are fully compatible with the DP ones:
http://www.redracingparts.com/english/motorbikesmotorcycles/partsandaccessories/footrestsrearsetsfootpegs/styleandperformance/916.htm

Footrest is €28

[yeti]

Wow, goodo, thanks Ant

[Felix]

Even closer than RedRacing, try Moto2 (http://www.moto2.co.uk/acatalog/Ducati_Race_Rear_Sets.html). They do spare pegs seperately and are compatible with DP.

Can't believe Antonye didn't suggest this one. ;)

[yeti]

Originally posted by Felix
Even closer than RedRacing, try Moto2 (http://www.moto2.co.uk/acatalog/Ducati_Race_Rear_Sets.html). They do spare pegs seperately and are compatible with DP.


Any idea where these folks are Felix? They don't list the pegs seperately so I'm gonna need to call them to ask the price.

[antonye]

Didn't realise that Moto2 did seperate parts, otherwise I would have!

Tel 0870 760 6543

They're based in Herts I think, always good service. Bought loads of bits for the 600SS from them.

[Felix]

Yeah, ring 'em, Yeti. When I spoke to them a couple of months back, spare pegs, hangers, etc was no problem. I think I paid about 25 quid for a hanger.

[Garry Smith]

I am going to give them a call myself, because Ducati in their infinite wisdom no longer make the DP items so aftermarket is the only option unless you find a dealer with some still kicking about in stock.

This is also the case for a number of other DP items for the 748/9*6/8 series of bikes including the longer handlebars which I have always used as they make the bike easier to turn without resorting to ludicrous geometry settings.

Thanks for the tips!

[Felix]

Garry, Moto2 also do handle bars that fit the standard clip-on clamps. I think they are about £17 each but don't know the length. Also, I can still get hold of the proper Ducati pegs and bars if you need any.

[louigi]

I get the DP pegs remade as they are no longer available and can supply the longer handlebars as well but your clamps have to be reamed out, somthing I also do.
Rich

[Mr_S]

Are the footpegs handed, or does one side fit all? I'd assume they were, but you can never assume..

May order a spare if they're not specific to the side they're fitted.

[Garry Smith]

Rich and Felix,

Thanks for the replies/info.