Ohlins fork help needed-996RS

[Jasper]

Hi,

does anybody know what the upper and lower fork clamp sizes are for these forks? I am confident the top yoke is 54mm. I just need to know if the bottom should be 56mm or 57mm!

I need to machine a set of Mag yokes to take them but do not have the forks to measure. The readings vernier I have been sent vary over 1mm which is not accurate enough!

[Jasper]

some more pics:

[Quarrybends]

Safest bet is to call uk importer or official ohlins agent, quote the model number as the RS could of been fitted with a multitude of forks. Spares are still available and I'm pretty sure the specs are too.

[Jasper]

No model number mate. That's the problem.Hoping someone may recognise them.

[skidlids]

The forks I have for my 955 are 54mm top and 58mm lower
I wouldn't trust the calipers in the pic, I was using a similar digital set the other day and they had a bit of a dead spot OK up to a certain measurement and then OK after a different measurement, but in between the two they were far from accurate, Dallas has probably binned them by now