600ss BITS

[Scooter916]

Guys im about to break a 600ss (96) before I list it all on e bay you get first dibs.
I will be keeping the engine forks and frame as DD spares. pretty much the rest id up for grabs. Its red FF.
Glyn

[ali]

Diehard was desperate for a front wheel spindle. Drop him a u2u. :)

[paynep]

I could use the front fairing bracket as mine seems to have got bent :puzzled:

[Scooter916]

paul do you want me to bring it to cadders
Glyn

[woottong]

Hi Glyn… just read your post. Do you have the tank, or more specifically I need the low level fuel sensor unit from the underside as the 4 wires on mine coming from the sender and connecting to the main loom are frayed. Ideally I just need the sender, but possibly the tank (see below).

The other specific is the middle fairing bolt with the rubber insert that goes into the horizontal post with a brass nut on the inside that the fairing bolt screws into – I had to cut mine apart when I took the fairing off as it was just spinning!

I have only just acquired the bike, and I am wondering whether it might be sensible to get more spare parts for it – hence my the reference to the taking the complete fuel tank from you. The next question I guess is.... what else do you have and maybe how much do you want for the lot?

Thanks,

Glyn (yup... same name :) )

Tel: 07812 144947

[woottong]

Hi Glyn... having a bad day; just looked back at the post and realised it goes back to 2005... oops!... but then you never know.

[skidlids]

Think you'll find Glyn's 600SS bits long gone, currently replaced by Triumph 675 bits for the bikes he runs in the British Supersport Championship as owner of one half of the ANRTSS (TTS =The Scooter Shop) team.