View Full Version : Rusty petrol tank -inside
whyworry
03-Oct-2005, 23:07
can any clever clogs tell me how to remove rust from inside a classic bike petrol tank?
i have some of the stuff you can buy which coats the inside when you eventually do get it all clean inside- but is it any good? and whats best way of getting it clean and rust/muck free??:puzzled::puzzled::puzzled:
philthy
03-Oct-2005, 23:21
In the olden days we used to put a couple of handfulls of stone chippings in and shake like bu**ery til your arms dropped off.
Cleans your tank and gives you arms like a gorrilla:D
monstermob 998
03-Oct-2005, 23:22
i havent tried this myself but it was featured in classic mechanics- as well as a tip of placing ball bearings in the tank and shake to remove loose rust( dont know wether i would try the ball bearings myself)
http://www.frost.co.uk/result_search.asp
i think the kit is just a rust inhibitor and coating of zinc phosphate
[Edited on 3-10-2005 by monstermob 998]
Rushjob
03-Oct-2005, 23:29
I had this on a Landrover some years ago.
I used the ball bearing idea to knock off the flaky stuff then used some resin to line the tank - can't for the life of me remember the name of it but it's regularly advertised in Classic Bike & Classic car mags.
To my knowledge, the tank which had the consistency of lace in places when I started out, was still totally petrol tight 5 years later after being abused off road and generally mistreated.
rockhopper
03-Oct-2005, 23:33
Petseal might it have been?
Rushjob
03-Oct-2005, 23:35
Give that man a cigar!
Yes... that was the stuff!
Here...... Petseal (http://www.net-biker.co.uk/acatalog/Petseal.html)
monstermob 998
03-Oct-2005, 23:37
my mate just suggested sand blasting with a pressure washer he says tthat he thinks karcher does them???????
just done a quick seerch and found this
http://www.justoffbase.co.uk/s.nl/sc.9/category.373/.f
may help
Originally posted by monstermob 998
i havent tried this myself but it was featured in classic mechanics- as well as a tip of placing ball bearings in the tank and shake to remove loose rust( dont know wether i would try the ball bearings myself)
http://www.frost.co.uk/result_search.asp
i think the kit is just a rust inhibitor and coating of zinc phosphate
POR 15 Motorcycle Tank Repair kit is what you need.
http://www.frost.co.uk/item_Detail.asp?productID=8222
I used it on my '95 900SS whith excellent results. It includes a metal cleaner, rust convertor which gives a Zinc oxide coating and finally a flexible coating which lines the entire tank. This stuff is good !
vBulletin v3.5.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.