PDA

View Full Version : SPS Carbon heat shield

PDL
26-Oct-2005, 23:49
What do i have to do to get this heat shield to fit my 748 Bip?

http://cgi.ebay.co.uk/Ducati-748-916-996-SPS-Style-Race-Carbon-Heat-Shield_W0QQitemZ8009204181QQcategoryZ10448QQrdZ1QQ cmdZViewItem

Is it different down pipes or can I get a bracket or something?
KeefyB
27-Oct-2005, 06:48
You can get a threaded bracket that fits around the exhaust pipes.I bought one for my 996 and got the bracketss in the packet.I think they are available separately.
I may still have one or two kicking around in the garage.

[Edited on 27-10-2005 by KeefyB]
Whele
27-Oct-2005, 20:47
somebody has got to say it

Buy a 996SPS

:lol:
PDL
27-Oct-2005, 22:42
Originally posted by Whele
somebody has got to say it

Buy a 996SPS

:lol:

Eventually that is the idea but also keeping the 748, but at present my budget and marriage will only stretch to a heat shield. :(
aka.eric
27-Oct-2005, 22:59
Ive got this one,its used but in good condition, a couple of small chips on the front edge,with the clamps for standard pipes.Came from Rip so its good quality carbon.£20 if its any use to you.
PDL
29-Oct-2005, 19:35
Sorry aka.eric only just seen your post. You have u2u.
deej
13-Nov-2005, 22:27
eric if its still available i'll take it off your hands if it will fit 50mm termis
aka.eric
13-Nov-2005, 23:12
Sorry,Desmo had it.The clamps were for 45mm system.The Termis I fitted had the brackets welded on the pipe,this type of guard is no good as the hole centres are different.I used a standard 998 aluminium guard,the carbon one was no longer available.