Log in

View Full Version : S4 Clutch Problem

Mr C
13-Dec-2005, 20:10
Just got myself an Andodised Presure plate. Only thing is now its fitted the clutch lever is solid and the plate is not pushing back on the clutch plates. Could the original push rod be too long?
berto
13-Dec-2005, 20:28
:rodent: Wouldn't have thought so..What make is it.take it off and start again.
chrisw
13-Dec-2005, 20:29
Check to see if the mark on the plate is lined up with the slotted post and that the teeth on the inside face of the plate mesh with the ones on the drum.
Mr C
13-Dec-2005, 21:15
Originally posted by chrisw
Check to see if the mark on the plate is lined up with the slotted post and that the teeth on the inside face of the plate mesh with the ones on the drum.

Yep thats got it... Thanks
chrisw
13-Dec-2005, 21:54
Glad to help