Can anyone make some shims please ?

[keefer]

ok I need two shims for my right hand footrest
as I have put a bigger exhaust on there and they don't fit at the mo
if anyone can help give me a shout and I will send the measurements on.
Thanks all.
K

[RickyX]

If you can't get some nicely turned ally shims you could try either a thick stack of washers or a simple square/rectangular ally block of suitable thickness drilled to suit the mounting bolts.

RX

[phil_h]

Stainless washers work a treat, as you dont get that problem with the plating on ordinary washers being 'slightly less than perfect'

[keefer]

all sorted.
Thanks