View Full Version : clutch springs
hi folks,just after some tips on the best way to change my old rusty's for some nice sparklin john hackett specials i've purchased...i know this as probably been covered but cant find posts cheers all:burn:
Col996s
01-Apr-2006, 22:06
This is one of the easiest jobs, it must be as I have done it. Replace each spring one at a time. Use an Allen key and undo each screw, remove the spring and cap. Replace with new spring and re-assembly.
Originally posted by Col996s
This is one of the easiest jobs, it must be as I have done it. Replace each spring one at a time. Use an Allen key and undo each screw, remove the spring and cap. Replace with new spring and re-assembly. cheers mate,did you just nip them as i dont possess a torque wrench
The Big Red One
01-Apr-2006, 23:30
I think they are only about 5 nm which is next to nothing at all(nip is about it). Do it when cold and use thread lock on the bolts hope this helps
Sharpy G
02-Apr-2006, 00:51
how on earth did that happen ???
final_edition
02-Apr-2006, 02:11
Originally posted by Dseered
Umm, be carefull if your are a dooooofus like me !
http://img77.imageshack.us/img77/5433/p101000110wr.jpg
At least there's some money there for a new one:D
vBulletin v3.5.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.