More Help Required Please. Bearing change in input shaft.

[Red-leader]

The bearing in the end of the input shaft needs changing on my 900ss. Its the small needle bearing that the clutch push rod goes through before it seats in the pressure plate bearing.
Mine has exploded into loads of tiny needles in the clutch housing.
I can see the remains of the bearing in the end of the input shaft, but have no idea how to remove whats left.
So far I have the push rod out the pressure plate and all clutch plates out. Just leaving the inner and outer clutch baskets attached. But having a good look at the end of the input shaft I cannot see how the bearing is removed.
Does the big nut holding the inner basket have to be removed also ?
HEEEEEEEEEEEEELP
Thanks Kev

[AK]

Kev, do you want some company tomorrow nite;) can pop over about 7.30ish if you like and will bring tools?
My mobile away so call c's mobile as am off line in a tic

Alan

[Red-leader]

Al have new bearing and push rod coming from Snells. But it wont be here untill Thursday.
I will ring you at home or CKs mob tomorrow. Thanks Kev

[Iconic944ss]

For some really good engine / parts diagrams try a download for here:

http://www.duc.nu/manuals/files.php?&file=Parts_Catalog_SS.pdf&sort=Date&skip=0&show=500

Page 11 shows the clutch in its entireity.

Its look like item 14 might be the bearings thats gone walkabouts.

I'd be interested to know of your learnings / progress.

Frank

ps - try and take lots of digi pics if possible, always good to have something to look at for the rebuild!

[Dibble]

why am i laughing .. !!!! sorry mate ....

[Red-leader]

Originally posted by DIBBLE
why am i laughing .. !!!! sorry mate ....

Coz you are sad !

K

[Dibble]

Originally posted by Red-leader
Originally posted by DIBBLE
why am i laughing .. !!!! sorry mate ....

Coz you are sad !

K

its another "triggers broom" bike .... by the time thr rebuilds over it'll be a 998 :frog: