Log in

View Full Version : number plate bracket


pj748r
03-Sep-2003, 15:56
does anyone know of anyone in the UK who can supply a number plate bracket similar to the one Evoluzione sell?want to clean up rear of bike.

Dude
03-Sep-2003, 16:41
Have a look here (http://ducatisportingclub.com/control/boards/viewthread.php?tid=331)

pj748r
03-Sep-2003, 17:46
Cheers Dude,will modify to fit below cans

lane748
03-Sep-2003, 17:58
Nelly at Cornerspeed sells em

antonye
04-Sep-2003, 22:36
Is anyone interested in these in Carbon Fibre, as I could make some up.

Cost would be around 25-30 quid I reckon.

Thoughts?

pj748r
05-Sep-2003, 07:58
Can you make one that drops down between the cans?if so how much?
would deffo be interested if you can.

antonye
05-Sep-2003, 12:25
I can pretty much make anything ... as long as it's not too complex ;)

The "above the cans" ones are pretty damn easy, but I'll have a look at a design for an "under the cans" bracket to see if it's feasible. Would be slightly more due to the extra CF involved though.

pj748r
05-Sep-2003, 19:13
Cheers Antoyne,i was thinking along the lines of the Evoluzione type bracket,Going to Florida on Tuesday for 3 weeks so if i don't reply just post here with price,how long etc.thanks PJ

chillo
08-Sep-2003, 14:58
i have a evo number plate holder, never been used. anyone interested??
cost me nearly £40 with the import duty>

I have velcro'd a 7"x1 1/4" reg plate to were the reflector used to sit.:devil:

Were can i get a bracket to fit there which would have a return on each end about an inch behind the plate?
I have a set of kellerman alloy mini indicators which i want to fit.

[Edited on 8-9-2003 by chillo]

antonye
08-Sep-2003, 15:59
Chillo,

Have a look at this thread (http://www.ducatisportingclub.com/control/xmb/viewthread.php?fid=18&tid=2927) for pics of the one Dude put plans together for.

Is this what you want? I'm thinking of making some in carbon if I get enough interest...

chillo
08-Sep-2003, 16:10
Antonye,

thats somewere near but still too big:D
will take a pic of my set up and post it.
I think mine is about 150x30mm:D
Would be interested in some carbon or i will try and get hold of a bit of alloy sheet.

[Edited on 11-9-2003 by chillo]

antonye
09-Sep-2003, 14:35
If you let me know the sizes I'll have a bash!

lane748
11-Sep-2003, 11:22
Originally posted by chillo
i have a evo number plate holder, never been used. anyone interested??
cost me nearly £40 with the import duty>

I have velcro'd a 7"x1 1/4" reg plate to were the reflector used to sit.:devil:

Were can i get a bracket to fit there which would have a return on each end about an inch behind the plate?
I have a set of kellerman alloy mini indicators which i want to fit.

[Edited on 8-9-2003 by chillo]

How much do you want for it? Is it an evoluzione one? Send me a U2U

pj748r
03-Oct-2003, 18:17
Hey Antoyne,back from the USA,have you worked out a price for the bracket yet?If so could you please let me know as soon as,cheers PJ

Dude
04-Oct-2003, 12:40
If someone can send me some kellerman indicator, I will model them up and create a braket for both 7" and 9" number plates in CAD. I can then give the CAD drawings out to people to make their own brakets or for antonye to make up in carbon fibre

Jon
04-Oct-2003, 20:10
Lane, I've got one of Nellys brkts with kellermans.

Dude. I've got one broken Kellerman without the mounting plate I can send you
I can let you know the lenght of the mount.

Jon

[Edited on 4-10-2003 by Jon]

antonye
04-Oct-2003, 22:53
Sorry - missed this thread!

If someone lets me know the Kellerman dimensions (or Dude makes up some CAD drawings) then I'll give it a whirl.

Currently perfecting heel plates atm ;)

Dude
06-Oct-2003, 12:17
Jon,

You have u2u with my address.