No temp gauge, Rev counter or indis (RESOLVED)

[flanagaj]

went out on the 748 tonight and one minute the rev counter and temp gauge were working fine. The next minute the rev counter and temp gauge had stopped working. The indis also stopped working.

I suspect that it is a fuse, but I just wondered if anyone has had this happen to them.

PS - Does anyone know a good place for a set of 748 clutch plates and basket ?

Thanks

[Edited on 14-5-2006 by flanagaj]

[flanagaj]

Sorry guys, but if anyone has any ideas as to why I suddenly lost my rev counter / temp gauge and indicators whilst riding I would be most grateful if you could point me in the right direction.

Thanks

[Fordie]

The signal for the Tacho meter comes from the ECU Fuses are normally under the seat near the ECU. 4D

[Stealth]

Check the big 30A fuse. Mine went and bikes still operated fine bar the rev counter temp gauge etc.,

[flanagaj]

Originally posted by stealth2
Check the big 30A fuse. Mine went and bikes still operated fine bar the rev counter temp gauge etc.,

Stupid me. Just checked the fuses and it seemed that the 7.5amp fuse for the pilot had blown. When I nicked the 7.5 amp fan fuse all was ok.

I was perplexed for a while as even though the indicators worked the bike would not start. Took me 15 mins before I realised.


THE STAND WAS DOWN !!! (DOH)