Mirror glass. - How do i remove and fit ?

[weeksy2]

Got a new mirror for the Wifes 748S. Hers was broken on Ferry over to France...

So how do i take the glass out of her broken one ? and how do i fit the glass into the new one ?

i'm assuming the mirror i ordered from Ducati will come without glass ?

thanks in advance guys.

[ath748]

I think underneath the housing is a small allen or torx bolt. Undo that and the mirror glass and ball joint should come out.

[bradders]

it could be a small screw, mine is, place long thin screwdriver up the hole and turn...otherwise as ath says

[weeksy2]

thanks boys...will have a little peek tonight :)

[Totto]

Can you buy just one glass or do they come in pairs ????????

[Rob B]

Just out of interest, is it a flat or phillips screw?

TIA, Rob

[ath748]

Just out of interest, is it a flat or phillips screw?

TIA, Rob

Just get out there and look! Lazy!!

:lol:

[jodycraw]

Phillips or cross head screw driver. And i think there's someone on ebay selling the mirror glass part only.... I needed one - but ended up getting yellow ones!

[weeksy2]

Would you believe £45 gets the FULL thing.... Mirror glass and rubber bit...

Brand new and colour matched... Ti Grey for her 748S...

Bargain or what !!!!

[Rob B]

Just get out there and look! Lazy!!

:lol:


Ha, ha. I've done that but being able to see through a 3.5mm hole into a black mirror is not a skill I possess.

I did tweak it with a small, straight bladed screwdriver at the weekend but it's a bit of a hassle to locate. I felt it could have been a pozi that I was just picking up on by chance, thus the question.