alternator rotor nut

[mat2hew]

anyone tell me what size socket I need for the alternator nut? had it apart today but forgot to look. derr ID10T.

[skidlids]

I thinks its 32mm but could be 30mm I will go and check

[skidlids]

It's 30mm for the alternator nut
it's the clutch nut that's 32mm

[mat2hew]

It's 30mm for the alternator nut
it's the clutch nut that's 32mm

thanks mate, I should have one of those

[antonye]

I think you'll need a deep socket to do it right though?

[mat2hew]

I think you'll need a deep socket to do it right though?

yep, sure will, I do have one and I've ordered a crank locking tool from ebay, so should all be good, thanks chaps

[Spjallen]

With the holding tool it's not that bad a job. Just make sure you seal the casings properly. I managed not to and suffered a seep for ages.

[mat2hew]

I suffered a seep for ages.

????

[antonye]

????

It's his age.

[badgerpilot]

http://www.tena.co.uk/men/products/male/tena-men-level-2/

[milesaway]

that's the race wets issue sorted then