Log in

View Full Version : Jubilee Clip - I need one please

phillc
06-Jul-2006, 10:24
I've found myself short one jubliee clip to fit a 600ss oil filter. Been making phone calls this morning, but at this stage no shop I can find seems to have one that will fit.

Will anyone at Oulton this weekend have one that I can buy/borrow/use? It'd be a big help.

Thanks!
antonye
06-Jul-2006, 10:24
K&N Oil Filters is what you really need!
phillc
06-Jul-2006, 10:25
K&N Oil Filters is what you really need!

Yeah, I've been told this - after doing my oil and filter change :-(
skidlids
06-Jul-2006, 10:32
Try a small independent car garage/service shop, if they are anything like Senna3's they will have a selection
Iconic944ss
06-Jul-2006, 10:35
Good old Halford do em in all sorts of sizes but this guy is great for stainless - very fast too:

http://www.inoxbolt.co.uk/productmainmenu.htm

But what's it need for Phill?

ps- yes - K+N filters have a 14mm bolt manufactured into the base.
Tonio600
06-Jul-2006, 10:46
K&N Oil Filters is what you really need!

too expensive... I think a clip is much more convenient when a standard oil filter is worth 2£...
antonye
06-Jul-2006, 10:50
Depends where you buy them from. I got 3 for £18 delivered which is not as cheap as using a 2CV oil filter (or whatever it is that fits!) but at least you're using a quality product and don't have to pay the extra for a jubilee clip and arse around fitting it!
Tonio600
06-Jul-2006, 11:12
Depends where you buy them from. I got 3 for £18 delivered which is not as cheap as using a 2CV oil filter (or whatever it is that fits!) but at least you're using a quality product and don't have to pay the extra for a jubilee clip and arse around fitting it!

budget racing, don't mind the 2mn hassle fitting the clip :D
fil2
06-Jul-2006, 11:14
budget racing, don't mind the 2mn hassle fitting the clip :D


Me neither..................
Chaz
06-Jul-2006, 11:18
I've found myself short one jubliee clip to fit a 600ss oil filter. Been making phone calls this morning, but at this stage no shop I can find seems to have one that will fit.

Will anyone at Oulton this weekend have one that I can buy/borrow/use? It'd be a big help.

Thanks!

I've got one you can have will be at oulton friday pm.
Chass.
antonye
06-Jul-2006, 12:10
budget racing, don't mind the 2mn hassle fitting the clip :D

Yebbut you're in the pikey class...
Chris Wood
06-Jul-2006, 13:16
A,

Does that make you a hybrid pikey throwback, ie in ss?
antonye
06-Jul-2006, 13:28
Does that make you a hybrid pikey throwback, ie in ss?

Wolf in pikey clothing!
Zimbo16
06-Jul-2006, 18:43
I'll have some on board as well at oulton
skidlids
06-Jul-2006, 19:20
Good old Halford do em in all sorts of sizes but this guy is great for stainless - very fast too:

http://www.inoxbolt.co.uk/productmainmenu.htm
.

Bit pricey on his hose clips
I just paid £3.60 for 3 stainless Norma ones this afternoon at the same time as picking up a couple of meters of -3 brake hose, 12 olives and 12 Panex Dzus fateners for fixing the seat and fairing on the new DD bike as I make an atttempt to turn next years Class A championship into a budget series.
phil_h
06-Jul-2006, 19:52
Just put 2 shorter ones together you fool !
skidlids
06-Jul-2006, 20:00
Just put 2 shorter ones together you fool !

Was going to suggest that yesterday then I remembered the clearance problems I had when I tried it on the 916
phillc
06-Jul-2006, 22:21
Was going to suggest that yesterday then I remembered the clearance problems I had when I tried it on the 916

That and the fact that the shorter ones I have are tiny and I'd need to put about half a dozen of them together to reach the required size.