Sharpy's Ebay bargain purchase of the day !

[Sharpy G]

Well happy !

bid on this :

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=016&item=260028516729&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1

to give me the opportunity to update the front on my 749R if I wanted to, went out about 2 hours before the auction ended to take Claire to the Cinema

forgot all about it, so just checked, and I won it !!

Cool, now I can have 1st or 2nd generation looks on my baby R !!!

[chris.p]

You will need to get the 05 mirror suports as well,due to the difference in fairing widths, not cheap as they are carbon as well.


Chris:burn:

[Sharpy G]

You will need to get the 05 mirror suports as well,due to the difference in fairing widths, not cheap as they are carbon as well.


Chris:burn:

thanks, but the 04 749R already has 'em and runs the wider fairing

just need a screen

G

[KP]

I don't know if its the same, but on my 999 the side fairings have a male locating pin on them, the female that was not on the updated carbon nose cone I had.
Its tricky to replicate where the holes should be drilled so I removed the locating pin itself. It seems they were only present on the grey swing arm models.
No issues after that.
Nice buy.

[Sharpy G]

this one seems to have the rubber grometted holes for the pins, from what I can see in the pics
G

[Sharpy G]

You will need to get the 05 mirror suports as well,due to the difference in fairing widths, not cheap as they are carbon as well.


Chris:burn:

here's a pic of the 04 749R/999R nosecone next to the 05/06 999R Nosecone

same width and profile

good news 'cos I don't have to mod anything to fit it !!

http://i54.photobucket.com/albums/g95/SharpyG/IMGP1961.jpg

http://i54.photobucket.com/albums/g95/SharpyG/IMGP1960.jpg