idle rate

[art]

Very simple question, Im a new owner of a 916. The bike idles at about 1000rpm and stalls constantly, can anyone let me know how to adjust this

Thank you

[Gaz 748]

Take r/side panel off and between the injectors is a rod with a big

white plastic nut on it, adjust to suit.

[Fordie]

Maybe a little more info, are you saying it stalls on take off, but tick's over ok. 1000 rpm's about right for t/o You say you are new to Dukes and V twins. The Duke can be easy to stall if you don't get the revs right to pull away,when my wife climbs on the pillion sure bet ill stall it or close to stalling a coule of times before readjusting to the extra weight (Not saying the wifes big or anything,far from it) 4D

[art]

it never stalls when pulling away only when idling, which is making traffic a nightmare for a beginner like me

[art]

what rpm would u suggest for idling. i heard 1100.

[Mr.R]

Take r/side panel off and between the injectors is a rod with a big

white plastic nut on it, adjust to suit.

Surely that adjusts the ballance between the throttle bodies.The idle adjuster is a slotted screw on the front TB.
Steve

[Fordie]

Yes between 1000-1100.as a quick fix when you come up in traffic use the fast idle button on the throlle twist grip to increase the revs a bit. It might help till you can sort it. 4D

[art]

Cheers 4D, looking forward to seeing what my new purchase can do, but until i sort this out just getting out of town is painful

[Fordie]

Art, You can use the throttle master screw to adjust the idle,its where the main cable attached to the throttle body but don't go to mad with . What part of the country are you from ? 4D

[art]

London so have to go quite a way for the open road.

[art]

The fast idle button helps but it depresses itself evrytime i release the throttle so im back to square one. could you tell me more about the throttle master screw...
Thanx

[sharpo]

Throttle master screw, fixed it for me.

I didn't know about the fast idle either for the first 12 months.

[Fordie]

At the other end of the throttle cable under the tank you should be able to see it on the right hand side after removeing side fairing. It looks like half a wheel as the cable nipple attaches to the body,there is an adjuster screw that point to the front of the bike that will increase or decrease the revs. 4D

[art]

Thanks fordie, have done that now, idles happily at 1100, no stalling now.. Still going to take it for a checkup anyway.