PDA

View Full Version : Whats wrong with this picture?


gregw916
23-Feb-2015, 20:17
Has anyone got a spare they want to sell me its on a 748 but thing most dry clutch hubs will fit.

http://i37.photobucket.com/albums/e52/gregwgsxr/IMG_20150221_142638.jpg (http://s37.photobucket.com/user/gregwgsxr/media/IMG_20150221_142638.jpg.html)

chris.p
23-Feb-2015, 21:48
Looks like the screws have seized in the posts and one of the posts has snapped when the screws have been forced.

I always used copperslip and I think the torque value is only about 5nm, or just "nipped up"

gregw916
24-Feb-2015, 07:39
Yep spot on, think someone must have used threadlock and a couple of the bolts rounded. A light tap with a centre punch was not the way to go apparently :mad: Hence the need for a new one.

Iconic944ss
24-Feb-2015, 17:17
MPL do some nice clutch plates - I have one in my 900ss:

http://stores.ebay.co.uk/mpltuningpartsltd/Ducati-Parts-/_i.html?_fsub=8532705

as do Oberon:

http://www.oberon-performance.co.uk/acatalog/Ducati_Racing_Clutch_Pressure_Plates_Copy.html

and MANY others...

gregw916
25-Feb-2015, 08:12
Yeh they know how to charge dont they :o

gregw916
02-Mar-2015, 12:20
:D
Fix it

skidlids
02-Mar-2015, 18:43
Turn it into a 4 poster like the race ones, might need to upgrade the remaining 4 springs though

gregw916
03-Mar-2015, 12:22
Drilled, tapped and counter sunk the back of the hub and shreadlocked a m6 high tensile bolt in.
Talked to a Ducati mechanic who said he had done a couple and they were still going.

Will use until a good one turns up.

skidlids
13-Mar-2015, 10:56
just noticed these
http://www.ebay.co.uk/itm/Ducati-Monster-900-900S-Inner-clutch-hub-fits-most-dry-clutch-Alloy/261799998147?_trksid=p2045573.c100034.m2102&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D29666%26meid%3D2434a9306b954d9ea4586d7e18a1 851d%26pid%3D100034%26rk%3D3%26rkt%3D4%26sd%3D1516 16559187