Clip ons

[Dominic Clegg]

Looking for some clip on handlebars for my dd for next year. been looking on ebay for ages and cant see any. last year i tryed some 620ss bars but then my hands got traped my the faring so im looking for some stright ones.

anybody got some i think they have to be 50mm. i want to mount them under the yoke and i like to have 4 rings showing through the top of the yoke.

DC

[Scooter916]

ZXR400 ones fit Dom and cheap too...
glyn

[Dominic Clegg]

can you get hold of them glyn

[chris.p]

Keep your eye open here Domanic, I am sure some will pop up for sale in the near future, just do not buy from AMS motorsport, very pricey;)

http://motors.search.ebay.co.uk/zxr400_Motorcycle-Parts-Accessories_W0QQcatrefZC6QQfcclZ1QQfclZ3QQfltZ9QQf romZR10QQfrppZ50QQfrtsZ0QQfsooZ2QQfsopZ2QQftrtZ1QQ ftrvZ1QQsacatZ14780


Chris:burn:

[Iconic944ss]

For new - find a dealer selling race products clip-ons, inexpensive and do the job well or as mentioned above - stick 50mm in an Ebay search, used suzuki clip-ons came up in my search and from memory I think R1 forks were also 50mm as one point.

Ahhh - here we go; some nice stuff from the USA with an ickle fitting chart

http://cgi.ebay.com/ebaymotors/50mm-43mm-GP-TECH-ADJUSTABLE-CLIP-ONS-WOODCRAFT-rc51_W0QQitemZ110069688433QQihZ001QQcategoryZ10066 QQrdZ1QQcmdZViewItem

Cheers - Frank

[Zimbo16]

Any good to you Dom?

http://www.ukmonster.co.uk/monster/showthread.php?t=20967

[skidlids]

Any good to you Dom?

http://www.ukmonster.co.uk/monster/showthread.php?t=20967

Not on his budget, but very nice bars they are the same as on my 750SSie Minitwin. They have a slight rise that allows them to clear the standard fairing when fitted bellow the yoke so would work well on a 620S

[kye]

Isn't Couchy floggin some alongside rearsets?

[MLC Racing]

A&R Racing Supplies do steel (no titanium) ones for about £35. Fit under my monsters top yoke, no risers and not the prettiest. May need to slightly re-route throttle cable but perfectly usable and repairable!!!!

[Martini]

Looking for some clip on handlebars for my dd for next year. been looking on ebay for ages and cant see any. last year i tryed some 620ss bars but then my hands got traped my the faring so im looking for some stright ones.

anybody got some i think they have to be 50mm. i want to mount them under the yoke and i like to have 4 rings showing through the top of the yoke.

DC

I have some I bought for my 600SS last year at the Ally Pally show and never fitted. Alloy, slightly raised. Look just like the Harris GP Clip-Ons in the pic above.

If you are interested I'll take a pic.

[skidlids]

I picked up a set at the Ally Pally show at the begining of 2005 from Extreme Byke Sportz, never got to use them as they ended up on Fil2s bike at the first DD meeting on the Cadwell Woodlands circuit. Senna3 uses the same ones

http://www.extremebykesportz.co.uk/xcart/customer/home.php?cat=820

[Dominic Clegg]

Any good to you Dom?

http://www.ukmonster.co.uk/monster/showthread.php?t=20967


just what im looking for a little out of what i wanted to spend on them but looks like thats what the cost is

[Dominic Clegg]

A&R Racing Supplies do steel (no titanium) ones for about £35. Fit under my monsters top yoke, no risers and not the prettiest. May need to slightly re-route throttle cable but perfectly usable and repairable!!!!


do they have a web site i can order from

[Dominic Clegg]

I have some I bought for my 600SS last year at the Ally Pally show and never fitted. Alloy, slightly raised. Look just like the Harris GP Clip-Ons in the pic above.

If you are interested I'll take a pic.


why did they not fit if there the same as the pic zimbo put up then i would be interested. send me a pm and we can talk money

[Martini]

why did they not fit if there the same as the pic zimbo put up then i would be interested. send me a pm and we can talk money

They are the raised ones from ExtremeBykeSports. They fitted the fork legs OK, but the standard 600SS brake reservoir clouted part of the clip-on.

see http://www.ducatisportingclub.com/showthread.php?t=14701

Several people suggested fixes, from swapping the resevoir for a ZX-6 one to shaving a few mm off the existing one!

I'll pm you a price and picture.

[Martini]

These are the bars I was talking about.

[Tonio600]

Hi Martini,

If Dom doesn't take them, you can send me a PM with your price.

Cheers
Tonio.

[Dominic Clegg]

They are the raised ones from ExtremeBykeSports. They fitted the fork legs OK, but the standard 600SS brake reservoir clouted part of the clip-on.

see http://www.ducatisportingclub.com/showthread.php?t=14701

Several people suggested fixes, from swapping the resevoir for a ZX-6 one to shaving a few mm off the existing one!

I'll pm you a price and picture.


thank you for your pm and i will take them thank you very much

[Iconic944ss]

Does anyone know of a two-piece clamp ring clip-on? So that the ring clamp has either two sets of bolts 180° apart or a fixing pin arrangement.

I remeber seeing some once upon a time but can't find them now.

Cheers - Frank

[Iconic944ss]

Stand down team - just found some myself:

http://www.ducati-kaemna.de/pic/katalog/pp01.jpg

http://www.ducati-kaemna.de/cms_en/katalog.htm?&view=artikel&artikel=1581

[skidlids]

I prefer the Harris ones

https://www.harris-performance.com/website/acatalog/hbs.jpg

[Dominic Clegg]

does any one know if harris type tube fit these clip ons?

They are the raised ones from ExtremeBykeSports. They fitted the fork legs OK, but the standard 600SS brake reservoir clouted part of the clip-on.

see http://www.ducatisportingclub.com/showthread.php?t=14701

Several people suggested fixes, from swapping the resevoir for a ZX-6 one to shaving a few mm off the existing one!

I'll pm you a price and picture.

[skidlids]

The Harris type tube (as sold on the A&R race van and such places for £11 ea) does not fit the clamps that come with the clip-ons from Extreme BykeSportz (Robby Moto) as they stepdown in size to enter the clamping area.
I get my tubes for my Harris clip-ons made by a mate and he has recently made some for Senna3 for his Robby Moto bars, Not sure if my mate will be able to make them next year as he did them on the side and he changes jobs in the new year when he comes to work for me :D

[Mikb]

Not sure if my mate will be able to make them next year as he did them on the side and he changes jobs in the new year when he comes to work for me :D
It may not be a problem Kev :) I will still have contacts in the "old" place unless they all leave too:lol: I can ask the question.

Oh and I best say hello as its my first post..Hello all!

[skidlids]

About time you posted Mick as your the longest owner of a Duke that I know among all my mates around Oxford.

as for getting bits done if we can source the material then Dougies evening shift will be the best bet.

Hopefully you will hear something about the job from HR later today (Tuesday)

[Mikb]

About time you posted Mick as your the longest owner of a Duke that I know among all my mates around Oxford.

as for getting bits done if we can source the material then Dougies evening shift will be the best bet.

Hopefully you will hear something about the job from HR later today (Tuesday)

Yep 9 an a half yrs to be exact! an I can still remember all the suckin in through the teeth and mumblings about not waiting around for the breakdown truck when I said I was buying one.:lol:

As for material for bars I hope to be taking the tube that the "company bought" ;) with me, so that may not be a problem.

Not heard from HR yet either, but post probably still has to catch up from xmas.

[trouty]

i picked up dd bike and had to travel 140 miles home in a tranny van where the alternator had siezed on route to collect said bike, meaning i had to make the journey back in the afternoon, getting dark, with no brakes, charging system, lights or cooling system. i got home and found that i couldnt get the bike into the back garden as the handle bars were too wide to fit through the house doors...

so to avert having to remove them each time i wanna get in and outta the house, i'm going down the clip on route.

i have sourced a (free) standard set of r1 50mm clipons which will hopefully do the job :)

[chris.p]

Here you go Domanic, at least you will be half way there.

http://cgi.ebay.co.uk/ZXR400-L-H-CLIPPON-HANDLE-BAR_W0QQitemZ140070830265QQihZ004QQcategoryZ10464Q QrdZ1QQcmdZViewItem



Chris:burn: