Ohlins suspensions for my new project on 996

[NTA3]

Hi
I am looking for Ohlins suspensions for my new project on 996,the question is can i use the Ohlins from 999s for my 996.
I know that front fender does not fit right way,and i know at the lower triple ohlins are 56mm and the showa is 53mm. I am interested to know if the calliper alignment will be an issue with my 996.
Thank you

[skidlids]

You may find the calipers are out of alignment as the 999 uses discs with a 15mm offset, just as the 748R did. So the easy option is four 5mm spacers to go between the caliper and the fork leg and 5mm longer M10 x 1.25 caliper bolts

[NTA3]

You may find the calipers are out of alignment as the 999 uses discs with a 15mm offset, just as the 748R did. So the easy option is four 5mm spacers to go between the caliper and the fork leg and 5mm longer M10 x 1.25 caliper bolts
Thanks !
If someone sell OHLINS forks for 784-996-998 that will be good to…

[NTA3]

Hey guys,

I finally found what i was looking for !
Can I use the Showa 25mm axle for this Ohlins forks ?
Thanks
]
http://i61.tinypic.com/206brtf.jpg

[skidlids]

Yes, standard spindle will fit

[NTA3]

Yes, standard spindle will fit

Thank you !!!

cheers

[skidlids]

A photo of the front end in my 996 taken last weekend, which is how I know the standard spindle fits

[NTA3]

A photo of the front end in my 996 taken last weekend, which is how I know the standard spindle fits

Nice