View Full Version : Changing engine temp to centigrade
Sorry for stupid question but I am a new convert to ST's. Just replaced my 750 SS i.e for a ST4 (second hand). The engine temp display is displayed in degrees fahrenhieght yet in the manual it shows it in centigrade. Unfortunately, I cannot seem to find a way of changing this in the manual- is it possible?
it aint on the st2
short n sweet
rockhopper
21-Feb-2004, 18:49
Seems to depend on which worker at the Ducati factory was fitting temp gauges when your bike was built. My ST2 was centigrade, the ST4 is farenheight. I dont think it is possible to change it other than by some computer/ECU black magic.
Rushjob
21-Feb-2004, 19:39
It just ain't possible - been there, tried, and failed.
It's nothing to do with the ECU - the output from there is the same - it's the display. There are at least 4 different part no's and they cannot be reprogrammed.
The ST2 display ( degrees C or F ) will not work on an ST4 & vice versa too!
Sorry Greg.
Thanks for the replies - I'll just leave it as it is then!
vBulletin v3.5.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.