Fitting C/F Airbox & JHP Filters

[rcgbob44]

For those who are contemplating fitting a new airbox and the JHP undertank filters, here are a few piccy`s

B4 I started to pull things off.

[rcgbob44]

here`s the old filter and injection removed.

[rcgbob44]

This is the new C/F airbox with the JHP filter mounts installed.

[rcgbob44]

here`s the airbox fitted with the injectors installed but without the filters.

[rcgbob44]

oops forgot piccy

[rcgbob44]

This is with everything done and fitted.

[rcgbob44]

here`s one of the injectors - size is important!!!!

[rcgbob44]

Here`s a side view with the box fitted etc.

[rcgbob44]

Last but not least, the lady with her clothes back on.

[andyb]

Almost worth leaving your tank off to look and stare......


When i did this, i re routed the rubber fuel pipe between the two inlet tracks, putting the T piece to the right side.
I then fed the front injector pipe underneath the right hand filter, and up to the front. (Using new hose)
This cleared the underneath of the fuel tank for precious air space.

[Old Yella]

Just about to tackle this with my mate on his 998S.

Any more hints and tips to look out for?

[rcgbob44]

Don`t rush it and take your time.
Carbon fibre blunts drill quickly and i used S/S fixings for the air filter adaptors and sealed then with silicone rubber to make them air tight.

Good Luck.

I have since re routed my fuel lines .