54mm Termis

[neil748r]

Hi Guys,

Can anyone tell me what the inside diameter of the tailpipes should be on a 54mm Termi system (I guess Arrows, Sil Motor etc will all be similar if not the same).

I need to have new end caps made and that's the only dimension I don't have.

Thanks, Neil.

[Desmondo]

You mean the measurement I've marked here?

http://www.desmo.plus.com/bike/exhaust/exhaust_small/exhaust6measure.jpg

Mine are Sils but I can measure up tonight if you want.

[ianh]

Hi, my 54mm termi sys. tailpipes measure 48mm I.D, off a 998

[neil748r]

Thanks guys!

Desmondo, yes that's the one.

Thanks again, Neil