PDA

View Full Version : Exhaust hanger set-up..

mogwai
01-Jul-2009, 11:15
Morning all,does anyone have a pic or link to an exploded view of the hanger set-up for 748-998 series bikes ?.

Just coming to the end of a mini-overhaul and want to get it right,previous owner to me must have lost some spacers/washers because something doesn't seem right..!

Cheers all..MOGGERS.
smilo006
01-Jul-2009, 12:27
don't have a picture just now.
However the figure of 8 component needs 2 rubber spacers in it. They are quite thick with bevels around each face. On to each of the four faces then fit four washers with a neck that fits into the spacer, so that the face of the frame or the strap or bolt do not deface the spacer.

Getting them on is a real pain. The bolts you need are also pretty long. Longer than all the others on the bike. The best way to fit that I have found is to fit the strap to the figure of 8 first but don't screw the bolt right in then fit this to the bike.
Shandy
01-Jul-2009, 17:49
If you download one of the parts catalogues from the link below for the 748/9**, they have some great exploded views of how it all goes together.

http://www.ducati.com/en/bikes/service/parts/2000.jhtml?family=parts

Cheers,

Shandy
mogwai
01-Jul-2009, 19:49
If you download one of the parts catalogues from the link below for the 748/9**, they have some great exploded views of how it all goes together.

http://www.ducati.com/en/bikes/service/parts/2000.jhtml?family=parts

Cheers,

Shandy

Excellent stuff !! Drawing 19 is the one im after..see how much i'm going to get stung for the bits now !! The little ali brackets a i have (item 6),are solid one half not holed both ends.

Cheers all for prompt replies.Moggers.
smilo006
02-Jul-2009, 17:41
Think I have some of the rubber gromits, if they are pricey from your local Ducati Dealer!!

Odd the figures of 8 clips I have are in fact are hollow at both ends.
antonye
02-Jul-2009, 18:46
I thought I had a couple of these, but when I checked I could only find the one in the attached pic. I think these are from a different model than the 916 line.

It's yours if you want it though!
mogwai
02-Jul-2009, 19:06
I thought I had a couple of these, but when I checked I could only find the one in the attached pic. I think these are from a different model than the 916 line.

It's yours if you want it though!

Many thanks for offer Ant,definitely different though.