PDA

View Full Version : Where to buy - 996 racing ally rear subframe

phillc
10-Jul-2009, 00:38
Can anyone recommend me a good place to buy an ally rear racing subframe for a 996?

Thanks!
boggy 8
10-Jul-2009, 09:28
try moto46
phillc
10-Jul-2009, 11:02
try moto46

Thanks. Will call them.
pguenet
10-Jul-2009, 13:25
Carefull, 996 and 748 are almost the same but not quite.
996 is based on the SPS one and was designed to take the P8 whereas the 748 was designed for the 1.6. Not that it matters that much for the ECU because a race bike has it front mounted anyhow... but the carbon seat supports are different for either bikes.
phillc
10-Jul-2009, 16:44
Carefull, 996 and 748 are almost the same but not quite.
996 is based on the SPS one and was designed to take the P8 whereas the 748 was designed for the 1.6. Not that it matters that much for the ECU because a race bike has it front mounted anyhow... but the carbon seat supports are different for either bikes.

Right so, a 748SPS or 748R subframe should work, right?

Not sure we'll have the necessary time to sort a wiring harness to front mount the ECU.
powerwheelie
11-Jul-2009, 10:50
Itīs not going to fit properly. I went through it with my 748S ECU and wiring harness. Bought a 996 al subframe and had to lengthen the wiring loom by about 10cm.
chris.p
11-Jul-2009, 15:47
This any good for you???

http://cgi.ebay.co.uk/ducati-748-916-996-998-sps-subframe-single-seat-frame_W0QQitemZ260444759957QQcmdZViewItemQQptZUK_M otorcycle_Parts?hash=item3ca3b7a795&_trksid=p3286.c0.m14&_trkparms=65%3A10%7C66%3A2%7C39%3A1%7C293%3A1%7C29 4%3A50


Chris:burn:
pguenet
11-Jul-2009, 15:55
Right so, a 748SPS or 748R subframe should work, right?

Not sure we'll have the necessary time to sort a wiring harness to front mount the ECU.

Depends what ECU you run.
If you run a P8 you need to look for a 996 ally subframe - generally coming from 996 SPS bikes.
pguenet
11-Jul-2009, 15:56
This any good for you???

http://cgi.ebay.co.uk/ducati-748-916-996-998-sps-subframe-single-seat-frame_W0QQitemZ260444759957QQcmdZViewItemQQptZUK_M otorcycle_Parts?hash=item3ca3b7a795&_trksid=p3286.c0.m14&_trkparms=65%3A10%7C66%3A2%7C39%3A1%7C293%3A1%7C29 4%3A50


Chris:burn:


That one looks like a 748 one to me.
powerwheelie
11-Jul-2009, 17:18
Yes, thatīs one for the M1.6 ECU.