Brembo clutch master cylinder wanted

[badgerpilot]

Due to mine taking most of the impact when I went clattering into the tyres at Mallory, its goosed so I'm looking for a replacement.

Hope a fellow DDer out there can oblige.

[Ghost]

Due to mine taking most of the impact when I went clattering into the tyres at Mallory, its goosed so I'm looking for a replacement.

Hope a fellow DDer out there can oblige.


Seen a 748 clutch master on the bay whilst surfing around today.

[Bionicle]

Theres a 2005 monster one up ending in 2 days http://cgi.ebay.co.uk/2005-Ducati-Monster-S2R-Brembo-Clutch-Master-Cylinder-/130511631387?pt=UK_Motorcycle_Parts&hash=item1e6319741b

[badgerpilot]

Thanks chaps, I'll have another look on there. Lost out on one that was the complete left hand bar yesterday. I need one that will accommodate my choke lever too though.

If I pull the clutch lever in quick I can hear movement in the plates but nothing if I pull back slowly and fluid squirts back into the reservoir. Am I right in thinking there's a seal within the master that could've popped and if so are they serviceable?

[Bionicle]

Yes i think JHP can refurbish them for you, give them a bell i think they charge around £40

[Ghost]

Thanks chaps, I'll have another look on there. Lost out on one that was the complete left hand bar yesterday. I need one that will accommodate my choke lever too though. If I pull the clutch lever in quick I can hear movement in the plates but nothing if I pull back slowly and fluid squirts back into the reservoir. Am I right in thinking there's a seal within the master that could've popped and if so are they serviceable?


No you don't the choke only needs to be a short length of cable easy reach at the side of the frame, Its a race bike trim the weight.FFS :D

[badgerpilot]

No you don't the choke only needs to be a short length of cable easy reach at the side of the frame, Its a race bike trim the weight.FFS :D

You trying to say I need to lose weight???? :mad:

[Imola Duke]

I have a clutch master cyl c/w new lever.
removed from a ST4. in vgc
PM me Scott

[bradders]

think Paul payne has a std one for sale too in his spares thread

[badgerpilot]

His is the coffin type Brads but cheers for the shout.

PM sent Ims.