For Sale - Corse discs - fit road wheels

[pguenet]

Hi

Selling a pair of Brembo narrow band race discs.
6mm thick, fully floatting.

Those are the same as fitted to the RS bikes except that they will fit the road wheels with the smaller hub, it is not often that such discs come up for sale. They have 6 bolt design as per 748 / 996 / 998 series.

They are the standard off set.

They will work with race calipers or will actually work with the 4 pad calipers with very slight modifications to the calipers (need to grind slighly the pad retaining knobs) so they don't catch the bobbins. This does not affect the safety, as the discs are thicker, there is no risk of the pads dropping.

Looking for £350 for those.

Attaching picture of the actual discs and showing them on the bike too. Only selling as my 996 will be going on to Widetrack front end.

http://i1177.photobucket.com/albums/x349/desmophil/IMG_0381.jpg

http://i1177.photobucket.com/albums/x349/desmophil/IMG_0380.jpg

http://i1177.photobucket.com/albums/x349/desmophil/100_1648.jpg

[skidlids]

Phillipe when fitted to a standard wheel what is the disc spacing
I'm wondering what offset are they
You mention standard offset but would that be 916 standard offset or 748R standard offset

[pguenet]

standard off set, not the specific off set of the 748R and 998R (i believe) models.

p

[Redsps]

hi P, I'm looking for a set for my ongoing project, would you take a lower figure by any chance....
Rob

[Redsps]

P, also looking for a set of FG9550's with the original yokes and fittings, have any lying around by anychance that you want to part with.
rob

[pguenet]

you have U2U