900SS 'Red Line'?

[AndyR]

I have a recently aquired 2001 900SSie. Can anyone clarify what the max rev limit is for this bike assuming cam belts etc are in good order. The handbook says 7500 on one page but on a diagram on a different page shows a line through 9000.

I know that revs are not necesarily the name of the game with this particular engine but equally don't want to be wasting that last bit of 'pull' in each gear by short shifting unnecesarily all the time.

Cheers

Andy

[Steve M]

My rev limiter comes in at 9250 rpm.
But I find 8500 is about the best point to change in full on mode!:bouncy:

[AndyR]

Thanks for your reply Steve. That gives me a bit more than I've been using up to now.

Though I have had no trouble whatever with either my previous 620 or the current 900, I am new to Ducatis (though now sold on them for life!) and am aware of their reputation among some folk as being a bit fragile if pushed too hard.

Guess all will be fine given proper and timely servicing tho'

[Steve M]

These engines are fine just so long as they are properly looked after and nothing too silly is done tunning wise.
happy to help:)

[ali]

I'm on my second 900 and have always revved the nuts off 'em when necessary :)

I spoke to Neil at Sigma about this t'other day, as he does flywheel lightening. When combined with lighter pistons/rods, this means a drastic loss in moving mass, making it much safer to rev higher.

Unfortunately it also means the loss of the deep duke throb that's all the character in a 2v, so I'm not too sure about getting it done. Probably easier to buy a weekend rice rocket...

Cheers,

Ali

[paulmort]

Hi M8
Ive tried to get the best from the engine, before and after various external and internal mods
I find the desmo "coughs" at between 8,500 and 9,000 and I always think that Im not gaining power after abaout 8,250
Trackdays I do pull 9,000 now and again but best to shift up at 8,000

Ive changed the front sprocket to 14 tooth from 15, hi comp pistons and a few other mods, but recommend changing at 8 1/2 thousand
try it and see if it helps, 9 thou seems ott to me
btw mines a 900ssie
rgds
mort

[kwikbitch]

I know that mines a 750s but mines around 9000...that's when he starts complaining...
as mort says about 8250-8500 is about the max that I would tend to take him before changing...:)

[DanShapotsky]

Hi

I've always taken them (900's x 3) to 9000 if they were up for it at the time - all 3 have been fairly stock engine wise but they're deffo up for it - over revving would be a different story but up to the red line they've been fine... no.. wait.. that's not right - they've been feckin marvellous :devil:

.. if you could stick it on a dyno and see the torque curve that would be your change point ..the way to get the best from these is to ride the torque lol... when it tops out.. change up :D ... I'd say it was probably more shoddy maintenance than a glass jaw as far as the engine rumours are concerned - if you treat em right they're bulletproof ..and Mr ducati says where the red line goes.. good enuff for me hehehe

Cheers

Dano :cool:

(slight clarification - mine's a '91 and the red line is marked at 9000 as were the others... from rereading your original post I got the impression that it's not marked ? - my handbook gives max power output at 7000 rpm, and max revs as 9000)

[Edited on 30-6-2004 by DanShapotsky]

[FiscusFish]

Originally posted by ali


I spoke to Neil at Sigma about this t'other day, as he does flywheel lightening. When combined with lighter pistons/rods, this means a drastic loss in moving mass, making it much safer to rev higher.

Unfortunately it also means the loss of the deep duke throb that's all the character in a 2v, so I'm not too sure about getting it done. Probably easier to buy a weekend rice rocket...

Cheers,

Ali

Fitting a lightweight FBF flywheel was the second best thing I did for my SL (After changing the rear sprocket to a 41t). It made the bike much more rideable and fun. It still has that "lumpy" V-twin feeling but it just gets everywhere in its rev range more quickly.

[Steve M]

the engines in the injected bikes have quite a few changes including things like a lighter crank etc, so they already spin up a bit quicker than earlier ones - bit less bottom end though.

[Fordie]

Ive had my 99/900SS on the dyno and there is a definent drop in torque and power as soon as you go over 8000rpm in fact you are loosing power. although it red line just over 9000. 4D

[AndyR]

Thanks to all for taking the time to reply. You are right Dano, no red line is marked.

8 to 81/2 sounds to be about optimum then. I am lucky enough to live not a million miles from Forza-Italia / Baines Racing at Silverstone circuit - so the crucial proper servicing is sure to be done.

Speaking generally as a new member of the DSC (and I have not been anywhere or met anyone yet) - its really encouraging to a beginner 'Duke-fiend' to have such a brilliant source of enthusiasm and knowledge to draw on.

Cheers again,

Andy

[paulmort]

Andy
send a post to Glyn Norford who rides up to Nelly's quite often
Jct 28 of M1 and 5 miles on A38
Would be great to meet up wiff you
rgds
mort in a very Blooo moment (and thats very good)
look fwd to mtg u m8
at 8,250 revs
mort:bouncy::bouncy: