PDA

View Full Version : M7 x 1.0 x 100mm socket head bolt

fastphil
30-Dec-2011, 23:13
wanted M7 x 1.0 x 100mm socket head bolt
skidlids
31-Dec-2011, 00:52
Not exactly a standard bolt, probably hard to come across
Might have to look into getting one made
fastphil
31-Dec-2011, 09:25
771.5.085.9C is used a 999R, but I need a M7 as this is the size used in a 999RS ! but cant find out if you can get due to holiday period
ChrisBushell
31-Dec-2011, 10:09
771.5.085.9C is used a 999R, but I need a M7 as this is the size used in a 999RS ! but cant find out if you can get due to holiday period

Best person to try would be Dave Middleton Stainless steel - I am sure they will be open on Tuesday.

Chris
antonye
31-Dec-2011, 15:27
M7 doesn't seem to be that rare, it's just the length which is a problem - ebay have varying sizes but I've only seen up to 70mm.
fastphil
31-Dec-2011, 17:42
M7 doesn't seem to be that rare, it's just the length which is a problem - ebay have varying sizes but I've only seen up to 70mm.

Yeah this is the problem I am finding :confused:
fastphil
31-Dec-2011, 17:43
Best person to try would be Dave Middleton Stainless steel - I am sure they will be open on Tuesday.

Chris
SS no good, need H/Tensile bolt
fastphil
04-Jan-2012, 18:46
M7 bolt sorted
skidlids
04-Jan-2012, 20:03
M7 bolt sorted

Custom made or off the shelf somewhere
fastphil
08-Jan-2012, 22:25
M8 x 150 12.9 cap head bolt.turned down to 7mm and threaded M7x1.0 x100mm