PDA

View Full Version : Brembo lever pin ?

Gbyte666
30-Jan-2012, 15:20
Anyone know where I can get the pin shown in the picture, I have bought a replacement clutch lever which did not come with the pin. The old one is solid and will not come out and Ducati do not do them seperatly wanting £80 for the whole thing.

http://img859.imageshack.us/img859/6931/clutchpin.jpg (http://imageshack.us/photo/my-images/859/clutchpin.jpg/)

Craig
antonye
30-Jan-2012, 15:54
There's some help about removing the pins here - lots of them have (hidden) screws you have to remove first!
http://www.webbikeworld.com/t2/pazzo/adjustable-levers.htm

But otherwise I think you're looking at buying the whole lot second-hand off ebay, tbh.
antonye
30-Jan-2012, 16:06
Just found this on a google:

http://www.af1racing.com/store/scripts/prodView.asp?idproduct=7756
Gbyte666
30-Jan-2012, 16:40
OMG 32 bucks from the USA..
MIne has the screw in plane sight. Just its stuck solid.
Thx though Ant

Craig
antonye
30-Jan-2012, 16:47
MIne has the screw in plane sight. Just its stuck solid.

I guess it's seized over time and probably been loctite'd into place as well.

Could you cut it from the OEM lever to use in the new lever, or can you only fit it by taking it apart?
dunlop0_1
30-Jan-2012, 16:58
Craig, I have a spare one. It's been seized on the little grub screw but I drilled and tapped it from the othrer side and it works fine. Yours if you want it? Just PM me your address mate.

Neil