View Full Version : rear spindle tool?
bradders
25-Feb-2012, 20:53
I have an ST alloy swingarm on my M620, which has hollow rear spindle. It has nut one side, what looks like torx b it the other - but its huge!! I fitted it without anything holding the spindle while I tighten the nut but that cant be right...is there a special tool or size of bit I need and can get?
848spence
25-Feb-2012, 23:35
I have an ST alloy swingarm on my M620, which has hollow rear spindle. It has nut one side, what looks like torx b it the other - but its huge!! I fitted it without anything holding the spindle while I tighten the nut but that cant be right...is there a special tool or size of bit I need and can get?
Ive got some big torx bits you could borrow mate
Rushjob
28-Feb-2012, 18:08
It is right!
Just tighten the nut.......
bradders
28-Feb-2012, 22:36
thanks, it worked but wasn't certain if it just does it with holding the other end steady, if you know what I mean
vBulletin v3.5.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.