PDA

View Full Version : 600ss clutch slave seal.


mowglistromboli
19-Mar-2012, 17:59
My clutch has been getting progressively worse until saturday morning when the feel went from the lever and then i had nothing at all, nothing in the master cylinder! Removed right hand crankcase cover and yes the seals were dribbling like no-ones business. Does anyone one know where i can get seals from or do i have to bite the bullet and pay through the nose from a dealer if they have the parts? seems these type of slave cylinders have no aftermarket solution.

Ghost
19-Mar-2012, 18:25
They are just two O rings of differing material. Get the proper ones it will not break the bank.

mowglistromboli
19-Mar-2012, 19:45
They are just two O rings of differing material. Get the proper ones it will not break the bank.

Thanks, will give the dealer a bell tomorrow.