Ducati Sporting Club UK - ride height on a 748

Ducati Sporting Club UK (/msgboard.php)

- 998 / 996 / 916 / 748 (/forumdisplay.php?f=85)

- - ride height on a 748 (/showthread.php?t=29831)

Quote:

Originally posted by Harv748

Quote:

Originally posted by Totto
I have a John Hacket tool if any one needs to borrow it , once you know the height with that then you can use any other tool ,just plus/minus any difference

But as said in doogalmans post its 20mm , but if any one needs my tool to put their mind at rest then let me know :bouncy:

Trust me guys... I spent hours looking over this thing trying to get to the bottom of the readings...the literature that you recived with the tool is spot on.
Nicks already requested a new set of instructions off me as he has mislaid his originals...

I dont doubt your work !!

Sorry if that was the way it came across

It was supposed to mean , " that take mine and use it to see that Hav's is dead on "

Trust me i paid a lot more than what you charged for yours if you had of made yours earlier i would have blought one :saint::D

I use a rear ride height of 242mm measured with my own tool based on one I copied from an original Ducati one, prior to that I had tried making one to the drawing that was sent to me about 3 years ago.
Last year I had several discussions about this with Harv and he produced his instructions for the tools he was selling to compensate for the difference and therefore give the correct overall rear rideheight.

As for Sag I set it to 10mm unladen.

hehe
as you probably guess, now i have finally sorted my chain . . . .. . :lol: