SP4 Number Board
 

Can any of the SP4 SPS owners please measure a couple of the obvious dimensions on the side fairing number board plus the total height of the number "one" . I'd like to get some made.

Many thanks, Rob

[Edited on 16-3-2005 by rob41b]

Will measure it for you and send the details later today Rob.
Regards, Gary.

Here is a pic of mine not sure if that helps?

I would be up for a couple of these when they are done, I haver an SP4 with no number 1 on the fairing

Simon

Thanks for the pics, but what I need is some side to side or panel to edge of number panel dimensions so I can blow the photos up and generate templates. Either that, or someone traces them off and posts em down.

TIA, Rob

Number board
 

Did you get sorted Rob? If not, here's a photo. I've blown it up until it's lifesize on my own computer monitor, so if you can get your own screen to show roughly the same sizes as those I've marked, you should almost be able to measure the rest from the screen.

Bear in mind that the fairing curves a little though, so the sizes 'on-screen' are only ever going to be approximate.

Steve

Hi Rob, was unable to get the job done over the weekend, will get the measurements to you today.
Regards,
Gary.