| I couldn't get evry last bit off. The primer / filler coat that had got into the weave of the carbon I left. I'm having the tank resprayed, so no need.
The only problem I found was, if you had to go really deep into the carbon. The weave would become visable. I would have a word with ripsnortingvtwin with regards to getting it back to pure carbon.
As for looks, It looked great other than tiny bits of paint which had got between the carbon weave. I think the tank I have was always intended to be painted. If you have a tank which started out as pure carbon, it should be easier. to get it back the way it was.
[Edited on 18-12-2004 by Jon] |