[JPM]

I'm hoping someone on here must of done it.....

Stripped the bike yesterday, and I'm just going to leave it with the Renegade bodywork on etc, and replace the headlamp assembly with a pierobon bracket etc.

so I'm down to the headlamp assembly, I can see the bolts which join it to the frame, but the loom for the lights and speedo obviously connect somewhere inside the assembly, there also appears to be a row of fuses on one side.

I am led to believe the assembly is in two halves, but don't want to end up with a load of bits!!!

Any ideas..... guidelines etc

Cheers