| I use a transit Khu. Your best bet is to put the bike on its rear paddock stand in the center of the van. Push the front wheel right upto the seats and the n put a zip tie around the brake lever. Put the rachet straps, I only use two. One each side around the frame where the foor pegs are mounted. Make sure you rachet the bike so that the suspension travel is taken up. Otherwise when you hit a bump, the bike could bounce out of the straps.
There should be 6 strap points on the new 01 tranny onwards.
The old tranny I use to use the panel braces.
[Edited on 4-2-2005 by Jon]
[Edited on 4-2-2005 by Jon] |