| Ducati ‘95 916 Strada Suspension*& Chassis Setup
TIRE PRESSURE
Front/Rear: 32.5/36psi
FRONT DAMPING (Showa Forks)
Compression Damping (turn screws at bottom of fork clockwise till stop, then)
12 clicks counterclockwise
Rebound Damping (turn screws at top of fork clockwise till stop, then)
10 clicks counterclockwise
PRELOAD
Front Spring Preload (22mm wrench at top of fork)
0.78in (20mm) - 3rd notch from the top showing)
Rear Spring Preload
0.78in (20mm) of thread above top lock ring showing
REAR DAMPING (Ohlins)
Compression Damping
Turn resevoir (marked) knob clockwise to increase damping till stop, then
14 clicks counterclockwise
Rebound Damping (dial on bottom of spring)
Kneeling at left side of bike, turn the knob counterclockwise to increase damping till stop, then
14 clicks clockwise |