Quote:
Originally posted by sbwells
electricsheep - how much time is involved in setting the bike up once the exhaust has been fitted. What do they normally do. Trim the fueling and CO level, reset TPS etc?
I told my local dealer (475 miles away) that the boys in the UK are seeing around 130 rwhp from a 749R with a 54 / 57mm termi exhaust and some setup/head work. They haven't had one 749 / 999 series bike with anything more than termi asy. muffler kit fitted.
See over here in NZ there is only one bike in the whole bloody country that has had anything more than the termi asymetric muffer kit fitted. Propably due to cost and lack of knowledge. Oh and I forgot availability |
Open pipes like the 54mm and 57mm termi's or Leo Vinci's need either a new ECU with the correct fuel map or a Power Commander
Termi's come with the new ECU so they would need no setup.
If the pipe doesn't have a matching ECU then you would use a Power Commander
To setup a power commander properly you need a dyno and a skilled operator. If they have already worked on a similar bike I think the process is pretty quick
I found a link on the Power Commander sire for tuning sites in New Zealand
http://www.powercommander.com/center...tml#newzealand Hope that this helps
[Edited on 13-3-2005 by electricsheep]