Quote:
Originally posted by monstermob 998
just found some standard settings in owners manual for 750 and 900 any good?
rear shock basically 10mm of thread above locknut for pre load
for compression and rebound screw both adjusters fully clockwise then loosen by one turn
for front
for compression the (bottom of fork leg) screw all the way in and six clicks out
for rebound the (top middle one)screw all the way in and then four clicks
out
for preload 18mm from top of forkleg to top of nut
for 600 rear std sachs boge
pre load 14mm
compression 6 clicks back from fully clockwise
rebound 6 clicks back from fully clockwise |
This is the sort of thing I meant- thanks!