| Hi, the rotors can be repaired fairly easily, if they are just worn. Basically a good engineering shop will be able to put slightly larger rotor rivets on them. The discs on my F1 were very oblong, and being as rare as rocking house poop, they redrilled the disc and carrier to accept larger rivets. Better then new and still going strong. Otherwise all pre 749/999(only 5 bolts) 320mm discs will fit with the exception of the late model 748/996/998 R bikes which were fitted with Ohlins front forks, they are 5mm greater offset and the CORSE discs which were fitted to the 3 spoke marchesini wheels which are 10mm greater offset as the hubs are narrower. |