| Problem with new clutch
Fitted a new clutch to the 996bip '00 model
What has happened is after fitting it all together and running up the engine i noticed that the pressure plate seemed to be running out of line like a buckled wheel. Disengaged the clutch a couple off times and it ran normal. Started it again and it ran out. What has happened is the last friction plate has fallen out of the basket and not gone back in.
Should i leave out some off the steel plates or could it be i have been given the wrong basket/clutch kit. the number of plates matches up to what the haynes manual says.
Anyone else had this problem before. |